Results 1 to 5 of 5

Thread: what size industrial bar should I buy ?

  1. #1
    Junior Member
    Join Date
    Jun-2013
    Posts
    16

    Post what size industrial bar should I buy ?

    Hey I've been wanting to buy a couple of bars from this site for my industrial but I don't know what length to go for im so confused I am unable to go to a piercer to get it properly measured at the moment so hope you could give me a rough guide I went to a jewellery shop which sell industrial bars they said mine was more on the large side just above an average length they said 38 mm ??


    https://www.bodyjewelleryshop.com/on...e_11773341.cfm I would really like one of these if suitable please help on size

    Sorry im unable to send pictures atm

  2. #2
    dpack_1
    Guest

    Default

    Take out the one you have and measure it?

  3. #3
    Junior Member
    Join Date
    Jun-2013
    Posts
    16

    Default

    Quote Originally Posted by dpack_1 View Post
    Take out the one you have and measure it?
    I know it sounds silly but what do I meaaure it with

  4. #4
    Senior Member Drynwhyl's Avatar
    Join Date
    Oct-2009
    Location
    Serbia
    Posts
    2,506

    Default

    A ruler, measure it in milimeters. ball to ball, as in, don't include the ball length, measure only from the end of one ball to the begginin of the other one :p

    26mm both lobes, 6mm second lobes, 6mm left inner conch, 8mm septum, 2.4mm inner labia, 1.6mm nipples, 1.2mm nostril
    18x18cm mandala scarification on thigh

    tumblr

  5. #5
    dpack_1
    Guest

    Default

    O-------------O
    ..<---------->..

    If the bar is the top one, you measure the length between the balls as shown by the second line.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •