Results 1 to 7 of 7

Thread: Looking for a 1.0mm titanium open nose ring

  1. #1
    Senior Member Pingu1997's Avatar
    Join Date
    Dec-2009
    Location
    Reading, Berkshire
    Posts
    946

    Default Looking for a 1.0mm titanium open nose ring

    Anyone know where I can get one of these?

    Can find them in 1 point 2 mm in titanium

    Or 1 point 0 mm in steel

    But I really wanted a titanium one...

    And I have looked around (not being lazy honest) but I can't find what I am looking for..

    Thanks
    Corinne
    Last edited by Pingu1997; 05-10-2010 at 05:43 PM.
    I'm Corinne

    stabbed
    inked
    and not stopping yet

    I'm on Facebook
    http://www.facebook.com/profile.php?id=783178572





  2. #2
    Senior Member Drynwhyl's Avatar
    Join Date
    Oct-2009
    Location
    Serbia
    Posts
    2,506

    Default

    Does it have to be titanium because of the colour or because you can't use steel?
    These are the best I could find: http://www.bodyartforms.com/productd...D=6982&index=4

    26mm both lobes, 6mm second lobes, 6mm left inner conch, 8mm septum, 2.4mm inner labia, 1.6mm nipples, 1.2mm nostril
    18x18cm mandala scarification on thigh

    tumblr

  3. #3
    Senior Member kuku's Avatar
    Join Date
    Oct-2008
    Location
    Aylesbury
    Posts
    6,403

    Default

    http://www.crazy-factory.com/product...Titanium-.html

    Could try taking the ball out of the middle of this and closing with with pliers instead

    Otherwise I can only find steel really... I used to just buy little silver plated hoops for my nose but i'm giving the continuous steel ones a go when they arrive!
    Body Piercer and Creator of Body Poetry
    A Body Piercing advice site complete with fully detailed aftercare guides.

  4. #4
    Senior Member insideout's Avatar
    Join Date
    Feb-2005
    Location
    West Midlands
    Posts
    12,021

    Default

    I don't think I've ever seen any in 18g titanium.... If you're not going to be changing it often then I'd get one of these instead. Might be fiddly to put in and close the first time, but then it's there & it's definitely good quality

  5. #5
    Senior Member Pingu1997's Avatar
    Join Date
    Dec-2009
    Location
    Reading, Berkshire
    Posts
    946

    Default

    thanks for replies, I still can't get into my own thread (!?!). I wanted titanium cos I didn't think steel was suitable for a relatively new piercing and having spent months being kind to it and helping it be a happy nose, I don't want to piss it off by putting stuff in there which might annoy it

    Also it's not something I want to have in there all the time, just now and again, so that's why I wanted something that was easy to insert

    I'll have to give the steel one a try and see how it gets on. Not for another 3 or 4 weeks though, just want to make sure it's totally healed first. But it's going OK at the moment

    x
    I'm Corinne

    stabbed
    inked
    and not stopping yet

    I'm on Facebook
    http://www.facebook.com/profile.php?id=783178572





  6. #6
    Senior Member kuku's Avatar
    Join Date
    Oct-2008
    Location
    Aylesbury
    Posts
    6,403

    Default

    Just take the . out from between the 1.0 in the address for the thread and you can get here fine. Its just a forum bug!

    TBH as long as you are fine with cheap store earrings there is no reason not to try the steel, especially since its only going to be something you wear from time to time!
    Body Piercer and Creator of Body Poetry
    A Body Piercing advice site complete with fully detailed aftercare guides.

  7. #7
    Senior Member insideout's Avatar
    Join Date
    Feb-2005
    Location
    West Midlands
    Posts
    12,021

    Default

    https://www.glasswearstudios.com/cgi...&category=HOOP

    GWS have just released 18g glass open nose rings, perhaps they'd be suitable?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •