Results 1 to 6 of 6

Thread: Mapping out for larger jewellery

  1. #1
    Junior Member 2ke's Avatar
    Join Date
    Nov-2008
    Location
    Helsinki, Finland
    Posts
    3

    Default Mapping out for larger jewellery

    Hints and tips welcome this way!

    I've been snooping around a couple of months now and can't seem to find any retailers with a "good" range of barbell sizes. i'm looking for a 3-4mm (gauge) princebell, those i can find in the very onlinestore @ BJS -BUT the thing is that the 'bells are too short. i' ve yet to find a princebell longer than 20mm so if anyone's seen one around 30 mm you'd let me know right? THX
    2KÉ
    brow | scaffold | 6mm lobes | nipples | PA

  2. #2
    Senior Member Laura - Marie's Avatar
    Join Date
    Dec-2007
    Location
    Jersey C.I
    Posts
    2,654
    Peter Petrelli is my hero







    maybememories6@hotmail.com

    1.2mm Monroe
    1.6mm Septum
    3.4mm Lobe
    1.6mm Tongue
    3 Microdermals
    1.2mm Daith
    1.2mm Conch

  3. #3
    Senior Member insideout's Avatar
    Join Date
    Feb-2005
    Location
    West Midlands
    Posts
    12,021

    Default

    ...'princebell'? Eh? I assume it's a curved barbell you need, because like Laura said, they have straight ones on here.

    4mm here, 3mm here. I think they also have cheaper steel versions, but it's only 316L steel - only get it if you're happy with low quality and you don't react to nickel at all.

  4. #4
    Junior Member 2ke's Avatar
    Join Date
    Nov-2008
    Location
    Helsinki, Finland
    Posts
    3

    Default

    Ye, to clarify that out, yes i mean a curved barbell. Thankyou katexx, but the in the links u posted the barbells are custom made and as such aren't really the thing for my studentish budget. 316L is fine by me never had any problems with any materials excluding that rusty nail that i stepped on The reason i started this thread was to fintd out if there were any "assembly line" type of princebells. nonetheless Thanks!
    2KÉ
    brow | scaffold | 6mm lobes | nipples | PA

  5. #5
    gandy
    Guest

    Default

    wildcat are selling jewllery marked as princebells

    just saying

    316l is fine too as long as you dont have any problems with nickle

    edit:
    http://www.wildcat.co.uk/shop/produc...oducts_id=3809
    there you go

  6. #6
    Senior Member CaffeinatedGuy's Avatar
    Join Date
    Jul-2008
    Location
    Glasgow
    Posts
    1,358

    Default

    Everybody remembers that you measure a curved barbell straight from ball to ball, right? Just reminding y'all, in case that was part of the length problem/
    Tom

    Everybody needs to believe in something. I believe I'll have another beer!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •